2007 Chrysler Aspen Gets Alpine Subwoofer Upgrade

07/31/2020 By John Schwartz

A customer recently came in with his 2007 Chrysler Aspen looking to add more bass to his sound system. He already had an aftermarket head unit set up for the addition of a couple of subwoofers. After talking to the customer about his needs and how much additional bass he wanted, we wrote up a quote for him and set up an appointment for installation.

We decided to go with two Alpine Type R 12-inch subwoofers in a simple carpeted ported box powered by a 2400 watt Pioneer amplifier. A sealed box moderates the cone’s movement. It also takes more power to produce the same volume as in a ported box. Sealed boxes are typically more compact than ported boxes, and ported boxes are typically more efficient with air flow, so they have more overall output than a sealed enclosure, which means that
they can play louder overall.

The customer was so happy picking up his vehicle, and the box had great sound output.

If you (or anyone you know) are looking to add more bass to your sound system, stop by to see the team at Perfectionist Auto Sound and we can make a box perfectly suited to your wants and needs.

DD Audio and MTI Acoustics Make a 2015 Chevrolet Silverado Boom

07/24/2020 By John Schwartz

A customer came in with their 2015 Chevrolet Silverado looking to add lots of bass to their truck’s music system. After talking to the customer, we decided to go with an under-the-seat MTI Acoustics box, a brand of sub boxes we’ve recently become exclusive dealers for. The box we chose is a Stage 3 enclosure that houses three DD Audio 2508 8″ subwoofers, powered by an M2C 3500 watt amplifier.

To fit the box under the seat and assure that the vehicle could handle all of the power coming from these subs, we had to do a seat lift and upgrade all of the main factory electrical systems under the hood. We did a 2″ rear seat lift and the box fit perfectly. Even with the 8″ subwoofers, this was one of the loudest under-rear systems we’ve installed!

If you’re looking to add some, or a lot, of bass to your vehicle, stop by and see us here at Perfectionist Auto Sound. We can come up with something that will be perfectly tailored to your needs.

Custom Subaru WRX Subwoofer Enclosure for Anchorage Client

05/30/2020 By John Schwartz

A client recently contacted the team at Perfectionist Autosound & Security in Anchorage to ask about having a custom subwoofer enclosure constructed for his 2019 Subaru WRX STi. We had a look at the trunk of the vehicle and checked out the requirements of the Kicker L7 subwoofer he wanted to use. After going over a few design and material options, we provided the client with a detailed quote to complete the project. He loved the plan and gave us the go-ahead to get started.

Custom WRX STI Subwoofer Enclosure

WRX Subwoofer — 3/4″ MDF was used for the enclosure construction.

Our fabrication team designed this enclosure based on the specifications from Kicker and measurements in the vehicle. We constructed the main panels from ¾-inch MDF, and glued each of them to the adjacent panels to form an airtight seal that can handle the pressure created by the large woofer. We also added a brace to the center of the cabinet to reduce the chances of panel flexing at high volume levels.

Custom Subwoofer Enclosure Trim Panel

The red and black coloring of the enclosure was a perfect match for this WRX.

The laser cut logo looked great!

Our team carpeted the back and sides of the enclosure.

With the enclosure volume information and port dimensions in hand, our team set to work on designing the enclosure for this Subaru. The client wanted the bass to be loud while also playing low-frequency notes with authority. This goal would require a relatively large enclosure and a low tuning frequency.

Once the basic enclosure fabrication was complete and wrapped in durable black carpet, we set to work on the trim panel for the front panel. Our team created an opening for the subwoofer and a second one for the vent. We cut a large angle on the vent opening to help smooth the flow of air as it exits and enters the enclosure. The vent itself has a bend at the back of the cabinet and points upward.

We cut a rabbet into the back of the enclosure and trimmed the opening with a 45-degree angle bit so we could mount an accent panel that bears the STI logo. We cut the logo out of acrylic plastic with our Glowforge laser and then painted it with matte black paint, so it matches the cone of the Kicker subwoofer.

Alaska’s Custom Car Audio Experts

With the woofer mounted in place and the system dialed in, it was time to return the vehicle to the client. He was thrilled with the way the subwoofer looked in the trunk of his WRX and loved the way it sounds.

If you are in the Anchorage area and are interested in a custom subwoofer for your car or truck, drop by our store. You can also reach our team by e-mail using the contact form on our website.

Remote Start and Subwoofer Upgrade for Anchorage Mercedes C300

01/27/2020 By John Schwartz

A client from here in Anchorage dropped into Perfectionist Auto Sound & Security to ask about adding a remote starter and custom subwoofer system to his 2013 Mercedes-Benz C300 sedan. Having installed many remote start systems in these vehicles, we knew this was a perfect platform for a Mid City Engineering interface. We inspected the vehicle to formulate a few options for the audio upgrade. After a discussion with the client, we developed a plan to add a solid bass foundation to his European vehicle.

Custom Mercedes Subwoofer System

Our team did a great job adding bass while leaving plenty of space in this trunk.

The accent lighting and grilles really set this build apart.

The client was content with the features of the factory-installed audio system, but he wanted it to produce more bass with better low-frequency extension. We suggested the addition of a single 12-inch subwoofer and offered the option of building a trim piece to give the system a little extra style. With his approval, our fabrication team set to work creating a custom-sealed enclosure for a single Morel Ultimo Titanium subwoofer. The enclosure is located at the back of the trunk and the sub fires rearwards into the cargo area of the vehicle. The enclosure and trim pieces are constructed using techniques we learned while at Mobile Solutions in Arizona.

Using three layers of medium-density fiberboard (MDF), we created vinyl-wrapped trim pieces for around the woofer, then accent pieces of either side of the sub that include pressed mesh grilles. The trim pieces are wrapped in several different colors and we added flexible LED lighting around the grille openings.

Subwoofer Amplifier and Integration

A Pioneer GM-D9601 amplifier provides up to 800 watts to power the Ultimo TI 122 driver. The amp is wired to the vehicle electrical system using a 4-AWG amp kit from Stinger Electronics. We also used a PAC Audio two-channel line-level interface to extract an audio signal from the factory-installed sound system.

Mercedes Remote Car Starter

The Mercedes can be controlled from the client’s smartphone.

The client chose the limitless range of the Drone system.

After a discussion about how the client would be using the remote starter, we suggested combining the factory key fob integration of the Mid City Engineering interface with a Drone X1-LTE smartphone interface module. The client can start the vehicle and control the door locks from his smartphone from anywhere in the world, so long as both he and the vehicle have access to a cellular data signal.

Alaska’s Mobile Enhancement Specialists

After a few days of work, we had the starter and subwoofer system installed in this C300 Mercedes-Benz. The client was very happy with the work and loved the way the stereo sounds. If you are considering an upgrade for your car or truck, drop by Perfectionist Auto Sound & Security in Anchorage or click here to send us an e-mail.

Trust the Motorcycle Audio Experts at Perfectionist

06/21/2017 By John Schwartz

When it’s time to upgrade the audio system on your Harley-Davidson, the team at Perfectionist Auto Sound and Security in Anchorage is your motorcycle audio experts. No matter what you ride, we can install or upgrade an audio system that will sound better, play louder and last longer than anything you can buy online or at a bike show. We have decades of experience in designing and installing motorcycle audio systems. When you want the best sound possible for your investment, visit the motorcycle sound system experts at Perfectionist.

Mobile Audio Installation Experts

We don’t do oil changes, sell chrome foot pegs or overhaul motors. We are mobile electronics specialists. Our team understands the unique acoustic challenges and installation obstacles that a dealership or repair shop doesn’t.

Designing an entertainment system for your motorcycle is more involved than picking a package out of a catalog. We work with you to understand how loud you want the system to be, the kind of music you listen to and your expectations for sound quality. Armed with this information and more, we will develop a unique solution that provides the performance you expect, as well as incredible reliability.

The Best Equipment in the Industry

Choosing the right speakers, amplifiers and source units for each client starts with our supplier partnership. The companies behind the products we offer have invested thousands of hours in the design and engineering of premium audio solutions. Audio is not a hobby for them; it is everything they do.

We offer products designed specifically for the motorcycle environment. UV- and water-resistant speakers that sound great and compact amplifiers that can handle vibration while remaining efficient are just the tip of the iceberg.

System Integration, Not Just Installation

We prefer to call our team of motorcycle audio experts integrators, not installers. Professional installation is much more involved than simply turning a screwdriver. We start every project with a thorough inspection of your motorcycle. We confirm that all of the electrical systems are functioning properly and document everything on our tablet-based tracking system.

We protect your motorcycle while it is in our care. We have a large installation area, so other staff members and vehicles stay away from the bike. We prevent nicks and scratches by protecting panels and painted surfaces before we start work. We have safe locations to store seats, tanks and fairings while we work on the chassis of your bike.

We solder all of our electrical connections, then protect them with premium Tesa cloth tape. We secure wiring harnesses in place to prevent vibrations and damage. Once an installation is complete, a second member of our team inspects the project and signs off before the bike rolls out the door. A flawless experience is our mandate, every time!

Proper Tools and Training

Without accurate measurements, troubleshooting a system that isn’t performing as expected is simply guesswork. We have invested in the tools and experience required to make electrical and acoustic measurements of any audio system. We use these tools to confirm that each installation is performing to the best of its ability before it leaves our shop, and we can track down and repair problems with existing systems. A motorcycle dealer simply can’t offer these services.

Alaska’s Motorcycle Audio Experts

When it’s time to upgrade the sound system on your motorcycle, visit Perfectionist Auto Sound and Security. A member of our sales team would be happy to develop a solution that exceeds your expectations for performance and reliability. For more information, send us an e-mail using our contact FORM.

Sunday	Closed
Monday	9:00 AM - 6:00 PM
Tuesday	9:00 AM - 6:00 PM
Wednesday	9:00 AM - 6:00 PM
Thursday	9:00 AM - 6:00 PM
Friday	9:00 AM - 6:00 PM
Saturday	9:00 AM - 6:00 PM